B1284 Servo Motor Potentiometer Airintake Left Circuit Failure

How to Fix B1284 Servo Motor Potentiometer Airintake Left Circuit Failure

Introduction

If you’re experiencing the B1284 error code on your car, it means that there’s a problem with the servo motor potentiometer air intake left circuit. This can cause a variety of issues, including poor engine performance, reduced fuel efficiency, and even stalling. Fortunately, fixing this problem is relatively straightforward, and you can do it yourself with a few basic tools and some know-how.

Step 1: Diagnose the Problem

Before you can fix the B1284 error code, you need to diagnose the problem. Start by checking the air intake system for any signs of damage or wear. Look for cracks or holes in the air intake hose, and make sure that all the connections are tight and secure. If you notice any issues, replace the damaged parts.

Next, check the servo motor potentiometer for any signs of damage or wear. This component is responsible for regulating the air intake, and if it’s not functioning properly, it can cause the B1284 error code. Use a multimeter to test the potentiometer’s resistance, and compare the results to the manufacturer’s specifications. If the potentiometer is faulty, replace it.

Step 2: Replace the Servo Motor Potentiometer

To replace the servo motor potentiometer, start by disconnecting the negative battery cable. Then, locate the potentiometer on your car’s air intake system. It’s usually located near the air filter box or the throttle body.

car vertical

Remove the electrical connector from the potentiometer, and then remove the mounting screws that hold it in place. Carefully remove the potentiometer from the air intake system, and then install the new one in its place. Make sure that the mounting screws are tight, and then reconnect the electrical connector.

Step 3: Clear the Error Code

Once you’ve replaced the servo motor potentiometer, you need to clear the B1284 error code from your car’s computer. To do this, reconnect the negative battery cable, and then start your car. Use an OBD-II scanner to clear the error code, and then take your car for a test drive to make sure that the problem has been resolved.

Conclusion

Fixing the B1284 error code on your car is a relatively simple process that you can do yourself with a few basic tools and some know-how. By diagnosing the problem, replacing the servo motor potentiometer, and clearing the error code, you can get your car back to running smoothly and efficiently.

FAQs

1. Can I drive my car with the B1284 error code?

It’s not recommended to drive your car with the B1284 error code, as it can cause a variety of issues, including poor engine performance, reduced fuel efficiency, and even stalling. It’s best to fix the problem as soon as possible to avoid further damage to your car.

2. How much does it cost to fix the B1284 error code?

The cost of fixing the B1284 error code can vary depending on the make and model of your car, as well as the severity of the problem. In general, you can expect to pay anywhere from $100 to $500 for parts and labor.

3. Can I fix the B1284 error code myself?

Yes, you can fix the B1284 error code yourself with a few basic tools and some know-how. However, if you’re not comfortable working on your car’s air intake system, it’s best to take it to a professional mechanic.