How to Diagnose and Solve B1467 Wiper Hi/Low Speed Circuit Motor Short To Battery Issues

Introduction

If you’re experiencing issues with your wiper motor, specifically the B1467 Wiper Hi/Low Speed Circuit Motor Short To Battery error code, you’re not alone. This issue can be frustrating, but with the right knowledge and tools, you can diagnose and solve the problem yourself. In this article, we’ll provide step-by-step instructions and useful tips to help you fix the issue and get your wipers working properly again.

What is the B1467 Wiper Hi/Low Speed Circuit Motor Short To Battery Error Code?

The B1467 error code indicates that there is a short circuit in the wiper motor’s hi/low speed circuit, which is causing the motor to draw too much power from the battery. This can cause the wipers to malfunction or stop working altogether.

Diagnosing the Issue

To diagnose the B1467 error code, you’ll need a multimeter and a wiring diagram for your vehicle. Here are the steps to follow:

Step 1: Check the Wiper Motor Fuse

The first thing to check is the wiper motor fuse. Use your vehicle’s manual to locate the fuse box and find the wiper motor fuse. Use a multimeter to test the fuse for continuity. If the fuse is blown, replace it and test the wipers again.

Step 2: Check the Wiper Motor Wiring

If the fuse is not the issue, the next step is to check the wiring for the wiper motor. Use your vehicle’s wiring diagram to locate the wiper motor wiring harness. Use a multimeter to test the wiring for continuity and check for any signs of damage or corrosion.

Step 3: Check the Wiper Motor Ground

If the wiring is not the issue, the next step is to check the wiper motor ground. Use your multimeter to test the ground connection for continuity and check for any signs of damage or corrosion.

Step 4: Check the Wiper Motor

If all of the above steps check out, the issue may be with the wiper motor itself. Use your multimeter to test the motor for continuity and check for any signs of damage or wear. If the motor is faulty, it will need to be replaced.

Solving the Issue

Once you’ve diagnosed the issue, it’s time to solve it. Here are some steps to follow:

Step 1: Replace the Wiper Motor Fuse

If the wiper motor fuse was blown, replace it with a new one.

Step 2: Repair or Replace the Wiring

If the wiring was the issue, repair or replace the damaged or corroded wiring.

Step 3: Repair or Replace the Wiper Motor Ground

If the ground connection was the issue, repair or replace the damaged or corroded ground connection.

Step 4: Replace the Wiper Motor

If the wiper motor was faulty, replace it with a new one.

Conclusion

The B1467 Wiper Hi/Low Speed Circuit Motor Short To Battery error code can be frustrating, but with the right knowledge and tools, you can diagnose and solve the issue yourself. By following the steps outlined in this article, you can get your wipers working properly again and avoid costly repairs at a mechanic.

FAQs

1. Can I still drive my car if the wipers aren’t working?

It’s not recommended to drive your car if the wipers aren’t working properly, as this can be a safety hazard.

2. How often should I replace my wiper blades?

It’s recommended to replace your wiper blades every 6-12 months, depending on usage and weather conditions.

3. Can I fix the wiper motor myself?

Yes, with the right knowledge and tools, you can diagnose and fix the wiper motor yourself. However, if you’re not comfortable working on your car or if the issue is more complex, it’s recommended to take your car to a mechanic.