How to Diagnose and Solve B1635 Mirror Driver Right Circuit Failure Issues

Introduction

As a car owner, you may have experienced issues with your car’s mirror driver right circuit. This can be frustrating, especially if you rely on your mirrors to drive safely. The B1635 error code is a common issue that many car owners face. In this article, we will discuss how to diagnose and solve B1635 mirror driver right circuit failure issues.

What is B1635 Mirror Driver Right Circuit Failure?

B1635 is an error code that indicates a problem with the mirror driver right circuit. This circuit is responsible for controlling the movement of the right mirror. When this circuit fails, the mirror may not move or may move erratically. This can be dangerous, especially when driving on the highway or in heavy traffic.

Diagnosing B1635 Mirror Driver Right Circuit Failure

To diagnose B1635 mirror driver right circuit failure, you will need a diagnostic tool. This tool will help you read the error code and determine the cause of the problem. Here are the steps to diagnose B1635 mirror driver right circuit failure:

Step 1: Connect the Diagnostic Tool

Connect the diagnostic tool to the OBD-II port in your car. This port is usually located under the dashboard on the driver’s side.

Step 2: Read the Error Code

Use the diagnostic tool to read the error code. The code will be displayed on the screen of the diagnostic tool. In this case, the code will be B1635.

Step 3: Check the Mirror

Check the mirror to see if it is moving or not. If the mirror is not moving, the problem is likely with the mirror motor. If the mirror is moving erratically, the problem is likely with the mirror switch.

Step 4: Check the Mirror Motor

If the mirror is not moving, check the mirror motor. Use a multimeter to test the voltage at the motor. If there is no voltage, the problem is likely with the wiring or the mirror control module. If there is voltage, the problem is likely with the motor itself.

Step 5: Check the Mirror Switch

If the mirror is moving erratically, check the mirror switch. Use a multimeter to test the voltage at the switch. If there is no voltage, the problem is likely with the wiring or the mirror control module. If there is voltage, the problem is likely with the switch itself.

Solving B1635 Mirror Driver Right Circuit Failure

Once you have diagnosed the problem, you can begin to solve B1635 mirror driver right circuit failure. Here are the steps to solve this issue:

Step 1: Replace the Mirror Motor

If the problem is with the mirror motor, you will need to replace it. You can purchase a new mirror motor from your local auto parts store or online. Follow the manufacturer’s instructions to install the new motor.

Step 2: Replace the Mirror Switch

If the problem is with the mirror switch, you will need to replace it. You can purchase a new mirror switch from your local auto parts store or online. Follow the manufacturer’s instructions to install the new switch.

Step 3: Check the Wiring

If the problem is with the wiring, you will need to check the wiring for any damage or loose connections. Repair any damaged wiring and tighten any loose connections.

Step 4: Replace the Mirror Control Module

If the problem is with the mirror control module, you will need to replace it. You can purchase a new mirror control module from your local auto parts store or online. Follow the manufacturer’s instructions to install the new module.

Conclusion

B1635 mirror driver right circuit failure can be a frustrating issue for car owners. However, with the right diagnostic tool and some basic knowledge, you can diagnose and solve this problem. By following the steps outlined in this article, you can get your mirrors working properly again and drive safely on the road.

FAQs

1. Can I diagnose B1635 mirror driver right circuit failure without a diagnostic tool?

No, you cannot diagnose B1635 mirror driver right circuit failure without a diagnostic tool. The diagnostic tool is necessary to read the error code and determine the cause of the problem.

2. Can I replace the mirror motor or switch myself?

Yes, you can replace the mirror motor or switch yourself. However, if you are not comfortable working on your car, it is best to take it to a professional mechanic.

3. How much does it cost to replace the mirror motor or switch?

The cost of replacing the mirror motor or switch will vary depending on the make and model of your car and where you purchase the parts. However, you can expect to pay anywhere from $50 to $200 for the parts and labor.