B1772 Seat Driver Backward Circuit Short To Ground

How to Diagnose and Solve B1772 Seat Driver Backward Circuit Short To Ground Issues

Introduction

If you’re experiencing issues with your car’s seat, specifically the driver’s seat, and you’ve received a B1772 error code, then you’re in the right place. This error code indicates a short to ground in the seat driver backward circuit, which can cause the seat to malfunction. In this article, we’ll guide you through the process of diagnosing and solving this issue.

Step 1: Check the Wiring

The first step in diagnosing this issue is to check the wiring. Start by inspecting the wiring harness that connects to the seat. Look for any signs of damage, such as frayed wires or loose connections. If you find any damage, repair or replace the affected wires.

Step 2: Check the Seat Switch

If the wiring appears to be in good condition, the next step is to check the seat switch. The seat switch is responsible for controlling the movement of the seat, and a malfunctioning switch can cause the B1772 error code. To check the switch, use a multimeter to test the continuity of the switch contacts. If the switch is faulty, replace it with a new one.

Step 3: Check the Seat Motor

If the wiring and switch appear to be in good condition, the next step is to check the seat motor. The seat motor is responsible for moving the seat forward and backward, and a malfunctioning motor can cause the B1772 error code. To check the motor, use a multimeter to test the resistance of the motor windings. If the motor is faulty, replace it with a new one.

car vertical

Step 4: Check the Seat Control Module

If the wiring, switch, and motor appear to be in good condition, the next step is to check the seat control module. The seat control module is responsible for controlling the movement of the seat, and a malfunctioning module can cause the B1772 error code. To check the module, use a diagnostic scanner to read the error codes stored in the module. If the module is faulty, replace it with a new one.

Step 5: Check the Ground Connection

If all of the above steps fail to resolve the issue, the final step is to check the ground connection. A poor ground connection can cause the B1772 error code. To check the ground connection, use a multimeter to test the resistance between the ground wire and the chassis. If the resistance is high, clean the ground connection and retest.

Conclusion

In conclusion, the B1772 error code can be caused by a variety of issues, including faulty wiring, a malfunctioning switch, a faulty motor, a malfunctioning module, or a poor ground connection. By following the steps outlined in this article, you can diagnose and solve this issue and get your car’s seat back to working properly.

FAQs

1. Can I drive my car with the B1772 error code?

It’s not recommended to drive your car with the B1772 error code, as it can cause the seat to malfunction and potentially lead to an accident.

2. How much does it cost to fix the B1772 error code?

The cost of fixing the B1772 error code can vary depending on the cause of the issue. It’s best to consult with a mechanic to get an accurate estimate.

3. Can I fix the B1772 error code myself?

If you have experience with car repairs and the necessary tools, you may be able to fix the B1772 error code yourself. However, if you’re unsure or inexperienced, it’s best to consult with a mechanic to avoid causing further damage.