How to Diagnose and Solve B1828 Wiper Rear High Limit Input Circuit Short To Battery Issues

Introduction

If you’re experiencing issues with your car’s wiper system, specifically the B1828 Wiper Rear High Limit Input Circuit Short To Battery error code, you’re not alone. This error code can be frustrating to deal with, but with the right knowledge and tools, you can diagnose and solve the issue on your own. In this article, we’ll provide you with step-by-step instructions and useful tips to help you fix the problem.

What is the B1828 Wiper Rear High Limit Input Circuit Short To Battery Error Code?

The B1828 error code is related to the wiper system in your car. Specifically, it indicates that there is a short circuit in the wiper rear high limit input circuit, which is causing the wiper system to malfunction. This can result in the wipers not working at all, or working intermittently.

Diagnosing the Issue

Before you can fix the issue, you need to diagnose it. Here are the steps to follow:

Step 1: Check the Wiper Fuse

The first thing you should do is check the wiper fuse. This is a small, rectangular component located in the fuse box under the hood of your car. If the fuse is blown, it can cause the wiper system to malfunction. To check the fuse, simply remove it from the fuse box and inspect it for any signs of damage or wear. If the fuse is blown, replace it with a new one.

Step 2: Check the Wiper Motor

If the fuse is not the issue, the next thing to check is the wiper motor. This is the component that powers the wiper system. To check the motor, you’ll need to remove the wiper assembly from your car. This can be done by removing the bolts that hold it in place. Once you’ve removed the assembly, inspect the motor for any signs of damage or wear. If the motor is damaged, you’ll need to replace it.

Step 3: Check the Wiring

If the fuse and motor are not the issue, the next thing to check is the wiring. This is the network of wires that connects the various components of the wiper system. To check the wiring, you’ll need to use a multimeter to test the continuity of each wire. If you find any wires that are broken or damaged, you’ll need to repair or replace them.

Solving the Issue

Once you’ve diagnosed the issue, it’s time to solve it. Here are the steps to follow:

Step 1: Replace the Faulty Component

If you’ve identified a faulty component, such as a blown fuse or a damaged motor, you’ll need to replace it. This can be done by purchasing a replacement component from an auto parts store and installing it yourself. Be sure to follow the manufacturer’s instructions carefully.

Step 2: Repair the Wiring

If you’ve identified damaged wiring as the issue, you’ll need to repair or replace the affected wires. This can be done by using a wire stripper to remove the damaged portion of the wire and splicing in a new section. Be sure to use the appropriate gauge of wire and connectors.

Conclusion

Dealing with the B1828 Wiper Rear High Limit Input Circuit Short To Battery error code can be frustrating, but with the right knowledge and tools, you can diagnose and solve the issue on your own. By following the steps outlined in this article, you’ll be able to get your wiper system back up and running in no time.

FAQs

1. Can I drive my car with the B1828 error code?

It’s not recommended to drive your car with the B1828 error code, as it can cause the wiper system to malfunction and potentially impair your visibility while driving.

2. How much does it cost to fix the B1828 error code?

The cost to fix the B1828 error code will depend on the specific component that needs to be replaced or repaired. In general, it can range from a few dollars for a fuse to several hundred dollars for a wiper motor.

3. Can I fix the B1828 error code myself?

Yes, you can fix the B1828 error code yourself if you have the right knowledge and tools. However, if you’re not comfortable working on your car’s electrical system, it’s best to take it to a professional mechanic.