P1397 Glow Plug Circuit High Input (Bank #1)

As a car expert, I understand how frustrating it can be when your vehicle is not functioning properly. One common issue that many car owners face is the P1397 Glow Plug Circuit High Input (Bank #1) error code. This error code indicates that there is a problem with the glow plug circuit in the engine’s first bank. Fortunately, this issue can be resolved with a few simple steps. In this article, I will provide you with a step-by-step guide on how to fix the P1397 Glow Plug Circuit High Input (Bank #1) error code.

Step 1: Check the Glow Plugs

The first step in fixing the P1397 Glow Plug Circuit High Input (Bank #1) error code is to check the glow plugs. Glow plugs are responsible for heating the engine’s combustion chamber, which is essential for starting the engine in cold weather. If the glow plugs are faulty, they can cause the error code to appear. To check the glow plugs, you will need a multimeter. Follow these steps:

1. Turn off the engine and let it cool down.
2. Locate the glow plugs. They are usually located near the engine’s cylinder head.
3. Remove the electrical connector from each glow plug.
4. Set your multimeter to the ohms setting.
5. Touch one probe of the multimeter to the glow plug’s terminal and the other probe to the engine’s ground.
6. Check the reading on the multimeter. If the reading is higher than the manufacturer’s specifications, the glow plug is faulty and needs to be replaced.

car vertical

Step 2: Check the Glow Plug Relay

If the glow plugs are functioning correctly, the next step is to check the glow plug relay. The glow plug relay is responsible for sending power to the glow plugs. If the relay is faulty, it can cause the error code to appear. To check the glow plug relay, follow these steps:

1. Turn off the engine and let it cool down.
2. Locate the glow plug relay. It is usually located in the engine compartment.
3. Remove the relay from its socket.
4. Check the relay’s terminals for corrosion or damage.
5. Set your multimeter to the ohms setting.
6. Touch one probe of the multimeter to the relay’s terminal and the other probe to the engine’s ground.
7. Check the reading on the multimeter. If the reading is higher than the manufacturer’s specifications, the relay is faulty and needs to be replaced.

Step 3: Check the Wiring

If the glow plugs and the glow plug relay are functioning correctly, the next step is to check the wiring. Faulty wiring can cause the error code to appear. To check the wiring, follow these steps:

1. Turn off the engine and let it cool down.
2. Inspect the wiring for any signs of damage or corrosion.
3. Use a multimeter to check the continuity of the wiring.
4. Check the wiring for any loose connections.

Step 4: Replace the Faulty Component

Once you have identified the faulty component, it is time to replace it. If the glow plugs are faulty, replace them with new ones. If the glow plug relay is faulty, replace it with a new one. If the wiring is faulty, repair or replace the damaged wiring.

Conclusion

The P1397 Glow Plug Circuit High Input (Bank #1) error code can be frustrating, but it is a relatively easy issue to fix. By following the steps outlined in this article, you can identify and fix the problem quickly and easily. Remember to always use caution when working on your vehicle and consult a professional if you are unsure about any aspect of the repair process.

FAQs:

1. Can I still drive my car with the P1397 error code?

It is not recommended to drive your car with the P1397 error code. This error code indicates a problem with the glow plug circuit, which can cause damage to your engine if left unresolved.

2. How much does it cost to fix the P1397 error code?

The cost of fixing the P1397 error code will depend on the extent of the damage and the cost of replacement parts. It is best to consult a professional mechanic for an accurate estimate.

3. How can I prevent the P1397 error code from occurring again?

Regular maintenance of your vehicle’s glow plug circuit can help prevent the P1397 error code from occurring again. This includes checking the glow plugs, glow plug relay, and wiring for any signs of damage or wear.