As a car expert, I understand how frustrating it can be when your vehicle is not functioning properly. One common issue that many car owners face is the P1868 Transmission Transfer Case Contact Plate Power Open Circuit. This problem can cause your car to stall or not shift gears properly, which can be dangerous while driving. In this article, I will provide you with a step-by-step guide on how to fix this issue and get your car back on the road.
Step 1: Diagnose the Problem
Before you can fix the P1868 Transmission Transfer Case Contact Plate Power Open Circuit, you need to diagnose the problem. This can be done by using an OBD-II scanner to read the error code. Once you have the error code, you can determine the cause of the problem. In most cases, the issue is caused by a faulty contact plate or a damaged wiring harness.
Step 2: Replace the Contact Plate
If the issue is caused by a faulty contact plate, you will need to replace it. To do this, you will need to remove the transfer case from your vehicle. Once the transfer case is removed, you can access the contact plate. Remove the old contact plate and replace it with a new one. Make sure to connect all the wires properly and reassemble the transfer case.
Step 3: Repair the Wiring Harness
If the issue is caused by a damaged wiring harness, you will need to repair it. To do this, you will need to locate the damaged wires and replace them. Make sure to use the correct gauge wire and connect the wires properly. Once the wiring harness is repaired, you can reassemble the transfer case and test your vehicle.
Useful Tips:
– Always wear safety gear when working on your vehicle, including gloves and eye protection.
– Make sure to disconnect the battery before working on your vehicle to avoid electrical shock.
– Use a torque wrench to tighten bolts to the correct specifications.
– Double-check all connections and wiring before starting your vehicle.
Conclusion:
Fixing the P1868 Transmission Transfer Case Contact Plate Power Open Circuit can be a daunting task, but with the right tools and knowledge, it can be done. By following the steps outlined in this article, you can diagnose and fix the issue, ensuring that your vehicle is safe to drive. Remember to always prioritize safety and double-check your work before starting your vehicle.
FAQs:
1. Can I fix the P1868 Transmission Transfer Case Contact Plate Power Open Circuit myself?
Yes, you can fix this issue yourself if you have the right tools and knowledge. However, if you are not comfortable working on your vehicle, it is best to take it to a professional mechanic.
2. How long does it take to fix the P1868 Transmission Transfer Case Contact Plate Power Open Circuit?
The time it takes to fix this issue depends on the severity of the problem and your level of experience. It can take anywhere from a few hours to a full day to complete the repair.
3. How much does it cost to fix the P1868 Transmission Transfer Case Contact Plate Power Open Circuit?
The cost of fixing this issue varies depending on the make and model of your vehicle and the severity of the problem. On average, it can cost anywhere from $200 to $500 to fix this issue.
