How to Diagnose and Solve B1663 Seat Driver Front Up/Down Motor Stalled Issues

Introduction

As a car owner, you may have experienced issues with your car’s seat motor. One of the most common issues is the B1663 Seat Driver Front Up/Down Motor Stalled issue. This issue can be frustrating, especially if you are unable to adjust your seat to your desired position. In this article, we will discuss how to diagnose and solve this issue.

What is the B1663 Seat Driver Front Up/Down Motor Stalled Issue?

The B1663 Seat Driver Front Up/Down Motor Stalled issue is a problem that occurs when the seat motor fails to move the seat up or down. This issue can be caused by a variety of factors, including a faulty motor, a damaged wiring harness, or a blown fuse.

Diagnosing the Issue

To diagnose the B1663 Seat Driver Front Up/Down Motor Stalled issue, you will need to perform a few tests. First, check the fuse for the seat motor. If the fuse is blown, replace it and test the seat motor again. If the fuse is not the issue, check the wiring harness for any damage or loose connections. If the wiring harness is damaged, repair or replace it. If the wiring harness is not the issue, the seat motor may be faulty and will need to be replaced.

Solving the Issue

To solve the B1663 Seat Driver Front Up/Down Motor Stalled issue, you will need to replace the faulty seat motor. To do this, follow these steps:

1. Disconnect the negative battery cable.
2. Remove the seat from the car.
3. Remove the seat motor from the seat.
4. Install the new seat motor.
5. Reinstall the seat in the car.
6. Reconnect the negative battery cable.

Useful Tips

When replacing the seat motor, it is important to use a high-quality replacement part. This will ensure that the new motor is reliable and will last for a long time. Additionally, make sure to follow the manufacturer’s instructions when installing the new motor.

Conclusion

The B1663 Seat Driver Front Up/Down Motor Stalled issue can be frustrating, but it is a problem that can be solved. By following the steps outlined in this article, you can diagnose and solve this issue quickly and easily.

FAQs

1. Can I drive my car with the B1663 Seat Driver Front Up/Down Motor Stalled issue?

Yes, you can still drive your car with this issue. However, it may be uncomfortable if you are unable to adjust your seat to your desired position.

2. How much does it cost to replace the seat motor?

The cost of replacing the seat motor will vary depending on the make and model of your car. However, you can expect to pay anywhere from $100 to $500 for the replacement part and labor.

3. Can I replace the seat motor myself?

While it is possible to replace the seat motor yourself, it is recommended that you have a professional mechanic perform the replacement. This will ensure that the replacement is done correctly and that the new motor is installed safely.