How to Diagnose and Solve B1659 Seat Driver Front Up Circuit Failure Issues

Introduction

As a car owner, it can be frustrating when you encounter problems with your vehicle. One of the most common issues is the B1659 Seat Driver Front Up Circuit Failure. This problem can cause the driver’s seat to malfunction, making it difficult to adjust the seat’s position. In this article, we will discuss how to diagnose and solve this issue.

What is B1659 Seat Driver Front Up Circuit Failure?

B1659 Seat Driver Front Up Circuit Failure is a diagnostic trouble code (DTC) that indicates a problem with the driver’s seat’s up circuit. This issue can cause the driver’s seat to malfunction, making it difficult to adjust the seat’s position. The problem can be caused by a faulty seat motor, damaged wiring, or a malfunctioning control module.

Diagnosing B1659 Seat Driver Front Up Circuit Failure

To diagnose B1659 Seat Driver Front Up Circuit Failure, you will need a diagnostic scanner. The scanner will read the DTC and provide you with a code that indicates the problem’s location. Once you have the code, you can begin to diagnose the issue.

Step 1: Check the Seat Motor

The first step in diagnosing B1659 Seat Driver Front Up Circuit Failure is to check the seat motor. The motor is responsible for moving the seat up and down. To check the motor, you will need to remove the seat from the vehicle and disconnect the wiring harness. Once you have done this, you can use a multimeter to test the motor’s resistance. If the motor has high resistance, it may be faulty and need to be replaced.

Step 2: Check the Wiring

If the motor is not the problem, the next step is to check the wiring. The wiring can become damaged over time, causing the circuit to fail. To check the wiring, you will need to use a multimeter to test the continuity of the wires. If the wires are damaged, you will need to repair or replace them.

Step 3: Check the Control Module

If the motor and wiring are not the problem, the control module may be malfunctioning. The control module is responsible for sending signals to the motor to move the seat up and down. To check the control module, you will need to use a diagnostic scanner to read the DTC. If the scanner indicates a problem with the control module, you will need to replace it.

Solving B1659 Seat Driver Front Up Circuit Failure

Once you have diagnosed the problem, you can begin to solve B1659 Seat Driver Front Up Circuit Failure. The solution will depend on the problem’s location.

Replacing the Seat Motor

If the seat motor is faulty, you will need to replace it. To do this, you will need to remove the seat from the vehicle and disconnect the wiring harness. Once you have done this, you can remove the motor and replace it with a new one.

Repairing or Replacing the Wiring

If the wiring is damaged, you will need to repair or replace it. To repair the wiring, you will need to locate the damaged wires and splice them together. If the wiring is too damaged, you may need to replace it entirely.

Replacing the Control Module

If the control module is malfunctioning, you will need to replace it. To do this, you will need to remove the old control module and install a new one. Once you have done this, you can use a diagnostic scanner to clear the DTC and ensure that the problem has been solved.

Conclusion

B1659 Seat Driver Front Up Circuit Failure can be a frustrating problem for car owners. However, by following the steps outlined in this article, you can diagnose and solve the issue. Whether it is a faulty seat motor, damaged wiring, or a malfunctioning control module, there is a solution to the problem.

FAQs

1. Can I drive my car with B1659 Seat Driver Front Up Circuit Failure?

It is not recommended to drive your car with B1659 Seat Driver Front Up Circuit Failure. The problem can cause the driver’s seat to malfunction, making it difficult to adjust the seat’s position. This can be dangerous while driving.

2. How much does it cost to fix B1659 Seat Driver Front Up Circuit Failure?

The cost to fix B1659 Seat Driver Front Up Circuit Failure will depend on the problem’s location. If it is a faulty seat motor, the cost can range from $200 to $500. If it is damaged wiring, the cost can range from $100 to $300. If it is a malfunctioning control module, the cost can range from $500 to $1000.

3. Can I fix B1659 Seat Driver Front Up Circuit Failure myself?

If you have experience working on cars, you may be able to fix B1659 Seat Driver Front Up Circuit Failure yourself. However, it is recommended to seek professional help if you are unsure of what to do. The problem can be complex, and it is important to ensure that it is fixed correctly to avoid further issues.