How to Diagnose and Solve B1660 Seat Driver Front Up Circuit Open Issues

Introduction

If you’re experiencing issues with your car’s seat, specifically the driver’s seat not moving up, down, or forward, you may have a B1660 Seat Driver Front Up Circuit Open issue. This can be a frustrating problem to deal with, but with the right tools and knowledge, you can diagnose and solve the issue yourself. In this article, we’ll provide step-by-step instructions on how to diagnose and solve this problem.

Step 1: Check the Fuse

The first step in diagnosing a B1660 Seat Driver Front Up Circuit Open issue is to check the fuse. Locate the fuse box in your car and find the fuse for the power seat. Check to see if the fuse is blown or damaged. If it is, replace it with a new fuse of the same amperage.

Step 2: Check the Wiring

If the fuse is not the issue, the next step is to check the wiring. Start by checking the wiring harness that connects to the power seat. Look for any signs of damage or wear, such as frayed wires or loose connections. If you find any issues, repair or replace the wiring as needed.

Step 3: Check the Switch

If the wiring is not the issue, the next step is to check the switch. Remove the switch from the power seat and test it with a multimeter. Check to see if there is continuity between the switch terminals when the switch is pressed. If there is no continuity, replace the switch.

Step 4: Check the Motor

If the switch is not the issue, the next step is to check the motor. Remove the motor from the power seat and test it with a multimeter. Check to see if there is continuity between the motor terminals when the switch is pressed. If there is no continuity, replace the motor.

Step 5: Check the Control Module

If the motor is not the issue, the next step is to check the control module. The control module is responsible for sending power to the motor to move the seat. Use a scan tool to check for any error codes related to the control module. If there are no error codes, test the control module with a multimeter to check for proper voltage and ground. If the control module is not functioning properly, replace it.

Step 6: Reassemble and Test

Once you have diagnosed and solved the issue, reassemble the power seat and test it to ensure it is functioning properly. Test all of the seat’s functions, including moving up, down, forward, and backward.

Conclusion

Dealing with a B1660 Seat Driver Front Up Circuit Open issue can be frustrating, but with the right tools and knowledge, you can diagnose and solve the issue yourself. By following the steps outlined in this article, you can save time and money by fixing the problem on your own.

FAQs

1. Can I drive my car with a B1660 Seat Driver Front Up Circuit Open issue?

It is not recommended to drive your car with a B1660 Seat Driver Front Up Circuit Open issue. This can be a safety hazard, as the driver’s seat may not be able to move properly in the event of an accident.

2. How much does it cost to fix a B1660 Seat Driver Front Up Circuit Open issue?

The cost to fix a B1660 Seat Driver Front Up Circuit Open issue can vary depending on the cause of the problem. If it is a simple fix, such as replacing a fuse, it may only cost a few dollars. However, if it requires replacing a motor or control module, it can cost several hundred dollars.

3. Can I fix a B1660 Seat Driver Front Up Circuit Open issue myself?

Yes, you can fix a B1660 Seat Driver Front Up Circuit Open issue yourself if you have the right tools and knowledge. By following the steps outlined in this article, you can diagnose and solve the issue on your own. However, if you are not comfortable working on your car’s electrical system, it is recommended to seek the help of a professional mechanic.