How to Fix B1383 Oil Level Lamp Circuit Short to Battery

Introduction

If you’re experiencing the B1383 error code on your car, it means that there’s a problem with the oil level lamp circuit. This can be a frustrating issue to deal with, but fortunately, it’s something that you can fix on your own with a little bit of know-how. In this article, we’ll walk you through the steps you need to take to fix the B1383 error code and get your car back on the road.

Step 1: Check the Wiring

The first thing you should do when you encounter the B1383 error code is to check the wiring. This error code is often caused by a short circuit in the wiring, so it’s important to make sure that all of the wires are properly connected and in good condition. Start by inspecting the wiring around the oil level lamp circuit and look for any signs of damage or wear. If you find any damaged wires, you’ll need to replace them before you can proceed.

Step 2: Check the Oil Level Sensor

If the wiring looks good, the next thing you should check is the oil level sensor. This sensor is responsible for detecting the oil level in your car and sending a signal to the oil level lamp circuit. If the sensor is faulty or damaged, it can cause the B1383 error code to appear. To check the sensor, you’ll need to locate it in your car’s engine bay and test it with a multimeter. If the sensor is faulty, you’ll need to replace it.

Step 3: Check the Oil Level Lamp Circuit

If the wiring and sensor both look good, the next thing you should check is the oil level lamp circuit itself. This circuit is responsible for illuminating the oil level lamp on your dashboard when the oil level is low. If there’s a problem with the circuit, it can cause the B1383 error code to appear. To check the circuit, you’ll need to use a multimeter to test the voltage at various points along the circuit. If you find any voltage drops or other issues, you’ll need to repair or replace the circuit.

Step 4: Clear the Error Code

Once you’ve identified and fixed the problem with the oil level lamp circuit, the final step is to clear the B1383 error code. To do this, you’ll need an OBD-II scanner. Simply connect the scanner to your car’s OBD-II port and follow the instructions to clear the error code. Once the code is cleared, you should no longer see the B1383 error code on your dashboard.

Conclusion

Fixing the B1383 error code can be a bit of a challenge, but with the right tools and know-how, it’s something that you can do on your own. By following the steps outlined in this article, you should be able to identify and fix the problem with your car’s oil level lamp circuit and get back on the road in no time.

FAQs

1. Can I drive my car with the B1383 error code?

It’s generally not recommended to drive your car with the B1383 error code. This error code indicates a problem with the oil level lamp circuit, which can cause issues with your car’s oil level monitoring system. It’s best to fix the problem as soon as possible to avoid any potential damage to your car’s engine.

2. How much does it cost to fix the B1383 error code?

The cost of fixing the B1383 error code will depend on the cause of the problem. If it’s a simple wiring issue, you may be able to fix it yourself for little to no cost. If the problem is with the oil level sensor or the oil level lamp circuit, you may need to replace these components, which can cost anywhere from $50 to $200 or more.

3. How can I prevent the B1383 error code from happening again?

To prevent the B1383 error code from happening again, it’s important to keep your car’s oil level monitoring system in good condition. This means checking the wiring and sensors regularly and addressing any issues as soon as they arise. It’s also a good idea to follow your car’s recommended oil change schedule to ensure that your engine is properly lubricated at all times.