How to Fix B1384 Oil Level Lamp Circuit Failure

Introduction

If you’re experiencing the B1384 Oil Level Lamp Circuit Failure error code, don’t panic. This is a common issue that can be easily fixed with a few simple steps. In this article, we’ll guide you through the process of fixing this error code and getting your car back on the road.

What is B1384 Oil Level Lamp Circuit Failure?

B1384 Oil Level Lamp Circuit Failure is an error code that indicates a problem with the oil level sensor circuit. This sensor is responsible for monitoring the oil level in your car’s engine and sending a signal to the dashboard when the oil level is low. When this circuit fails, the oil level lamp on your dashboard will illuminate, indicating that there is a problem with the oil level sensor.

Step-by-Step Guide to Fixing B1384 Oil Level Lamp Circuit Failure

Step 1: Check the Oil Level

The first step in fixing B1384 Oil Level Lamp Circuit Failure is to check the oil level in your car’s engine. Make sure that the oil level is within the recommended range. If the oil level is low, add more oil until it reaches the recommended level.

Step 2: Inspect the Oil Level Sensor

If the oil level is within the recommended range, the next step is to inspect the oil level sensor. The sensor is usually located on the side of the engine block and is connected to the wiring harness. Check the wiring harness for any signs of damage or corrosion. If the wiring harness is damaged, replace it.

Step 3: Test the Oil Level Sensor

To test the oil level sensor, you’ll need a multimeter. Set the multimeter to measure resistance and connect the leads to the sensor terminals. The resistance should be within the manufacturer’s specifications. If the resistance is outside of the specifications, replace the sensor.

Step 4: Replace the Oil Level Sensor

If the oil level sensor is faulty, the only solution is to replace it. To replace the sensor, disconnect the wiring harness and remove the sensor from the engine block. Install the new sensor and reconnect the wiring harness.

Useful Tips

– Always use the recommended type and grade of oil for your car’s engine.
– Check the oil level regularly to prevent low oil levels.
– If you’re not comfortable working on your car’s engine, take it to a professional mechanic.

Conclusion

B1384 Oil Level Lamp Circuit Failure is a common issue that can be easily fixed with a few simple steps. By following the steps outlined in this article, you can diagnose and fix this error code and get your car back on the road.

FAQs

1. Can I still drive my car if the oil level lamp is illuminated?

It’s not recommended to drive your car if the oil level lamp is illuminated. Low oil levels can cause serious damage to your car’s engine.

2. How often should I check the oil level in my car?

You should check the oil level in your car at least once a month or before any long trips.

3. Can I replace the oil level sensor myself?

If you’re comfortable working on your car’s engine and have the necessary tools, you can replace the oil level sensor yourself. However, if you’re not experienced with car repairs, it’s best to take your car to a professional mechanic.