How to Diagnose and Solve B1667 Mirror Driver Up/Down Motor Stalled Issues

Introduction

If you’re experiencing issues with your car’s mirror driver up/down motor, you may have encountered the B1667 error code. This code indicates that the mirror driver up/down motor has stalled, which can be a frustrating problem to deal with. However, with the right tools and knowledge, you can diagnose and solve this issue on your own. In this article, we’ll provide you with step-by-step instructions on how to diagnose and solve B1667 mirror driver up/down motor stalled issues.

Step 1: Check the Fuse

The first step in diagnosing B1667 mirror driver up/down motor stalled issues is to check the fuse. The fuse is responsible for protecting the mirror driver up/down motor from electrical surges and other issues. If the fuse is blown, it can cause the motor to stall and trigger the B1667 error code.

To check the fuse, locate the fuse box in your car. The fuse box is usually located under the dashboard or in the engine compartment. Once you’ve located the fuse box, find the fuse that corresponds to the mirror driver up/down motor. The fuse box cover should have a diagram that shows which fuse corresponds to which component.

If the fuse is blown, replace it with a new one of the same amperage. If the fuse is not blown, move on to the next step.

Step 2: Check the Wiring

The next step in diagnosing B1667 mirror driver up/down motor stalled issues is to check the wiring. The wiring is responsible for transmitting electrical signals to the mirror driver up/down motor. If the wiring is damaged or disconnected, it can cause the motor to stall and trigger the B1667 error code.

To check the wiring, use a multimeter to test the continuity of the wires. Start by disconnecting the wiring harness from the mirror driver up/down motor. Then, set your multimeter to the continuity setting and touch the probes to the corresponding wires. If there is no continuity, it means that the wire is damaged or disconnected.

If you find a damaged or disconnected wire, repair or replace it as necessary. If the wiring is not the issue, move on to the next step.

Step 3: Check the Mirror Driver Up/Down Motor

The final step in diagnosing B1667 mirror driver up/down motor stalled issues is to check the mirror driver up/down motor itself. The motor is responsible for moving the mirror up and down, and if it’s not functioning properly, it can cause the motor to stall and trigger the B1667 error code.

To check the mirror driver up/down motor, use a multimeter to test the resistance of the motor. Start by disconnecting the wiring harness from the motor. Then, set your multimeter to the resistance setting and touch the probes to the corresponding terminals on the motor. If the resistance is outside of the manufacturer’s specifications, it means that the motor is faulty and needs to be replaced.

If the mirror driver up/down motor is faulty, replace it with a new one. Once you’ve replaced the motor, test it to ensure that it’s functioning properly.

Conclusion

In conclusion, diagnosing and solving B1667 mirror driver up/down motor stalled issues can be a straightforward process if you have the right tools and knowledge. By following the steps outlined in this article, you can identify the root cause of the issue and take the necessary steps to fix it. Remember to always prioritize safety when working on your car, and don’t hesitate to seek professional help if you’re unsure about any aspect of the repair process.

FAQs

1. Can I drive my car with a B1667 error code?

It’s not recommended to drive your car with a B1667 error code, as it indicates that there’s an issue with the mirror driver up/down motor. This can affect your ability to adjust your mirrors, which can be a safety hazard while driving.

2. How much does it cost to replace a mirror driver up/down motor?

The cost of replacing a mirror driver up/down motor can vary depending on the make and model of your car. On average, you can expect to pay between $100 and $300 for the part and labor.

3. Can I replace the mirror driver up/down motor myself?

If you have experience working on cars and the necessary tools, you can replace the mirror driver up/down motor yourself. However, if you’re unsure about any aspect of the repair process, it’s recommended to seek professional help to ensure that the repair is done correctly.