B1786 Mirror Passenger Down Circuit Failure

How to Diagnose and Solve B1786 Mirror Passenger Down Circuit Failure Issues

Introduction

As a car owner, you may have experienced issues with your car’s mirror passenger down circuit. This can be frustrating, especially if you don’t know how to diagnose and solve the problem. In this article, we will guide you through the process of diagnosing and solving B1786 mirror passenger down circuit failure issues.

What is B1786 Mirror Passenger Down Circuit Failure?

B1786 is a diagnostic trouble code (DTC) that indicates a failure in the mirror passenger down circuit. This code is usually triggered when there is a problem with the mirror’s motor or wiring. The mirror passenger down circuit is responsible for controlling the movement of the passenger side mirror.

Diagnosing B1786 Mirror Passenger Down Circuit Failure

To diagnose B1786 mirror passenger down circuit failure, you will need a diagnostic tool that can read DTCs. Here are the steps to follow:

Step 1: Connect the Diagnostic Tool

Connect the diagnostic tool to the car’s OBD-II port. This port is usually located under the dashboard on the driver’s side.

car vertical

Step 2: Read the DTCs

Read the DTCs using the diagnostic tool. Look for the B1786 code, which indicates a failure in the mirror passenger down circuit.

Step 3: Inspect the Mirror

Inspect the passenger side mirror for any visible damage or signs of wear and tear. Check the mirror’s motor and wiring for any loose connections or damage.

Step 4: Test the Mirror’s Motor

Test the mirror’s motor using a multimeter. Set the multimeter to the resistance mode and connect the probes to the motor’s terminals. The multimeter should read a resistance value within the manufacturer’s specifications. If the resistance value is outside the specifications, the motor may be faulty and needs to be replaced.

Step 5: Test the Mirror’s Wiring

Test the mirror’s wiring using a multimeter. Set the multimeter to the continuity mode and check for continuity between the mirror’s motor and the car’s wiring harness. If there is no continuity, there may be a break in the wiring that needs to be repaired.

Solving B1786 Mirror Passenger Down Circuit Failure

Once you have diagnosed the problem, you can proceed to solve B1786 mirror passenger down circuit failure. Here are the steps to follow:

Step 1: Replace the Mirror’s Motor

If the mirror’s motor is faulty, you will need to replace it. You can purchase a new motor from your local auto parts store or online. Follow the manufacturer’s instructions to install the new motor.

Step 2: Repair the Wiring

If there is a break in the wiring, you will need to repair it. Cut the damaged section of the wiring and splice in a new section using wire connectors. Make sure to use the correct gauge of wire and follow the manufacturer’s instructions.

Conclusion

B1786 mirror passenger down circuit failure can be a frustrating problem for car owners. However, by following the steps outlined in this article, you can diagnose and solve the problem quickly and easily. Remember to always use the correct tools and follow the manufacturer’s instructions when repairing your car.

FAQs

1. Can I still drive my car with B1786 mirror passenger down circuit failure?

Yes, you can still drive your car with B1786 mirror passenger down circuit failure. However, you will not be able to adjust the passenger side mirror, which may be a safety concern.

2. How much does it cost to repair B1786 mirror passenger down circuit failure?

The cost of repairing B1786 mirror passenger down circuit failure depends on the extent of the damage and the cost of replacement parts. It is best to get a quote from a professional mechanic.

3. How can I prevent B1786 mirror passenger down circuit failure?

To prevent B1786 mirror passenger down circuit failure, make sure to regularly inspect your car’s mirrors for any signs of wear and tear. Also, avoid using excessive force when adjusting the mirrors.